Slave 1 - AMT Model - Chipping and Touch up [Part 4]

After masking the maroon and green with Parafilm (A technique we learned at Wonderfest this year), I went back in and sprayed a dark grey over the existing light grey and the newly completed internal structure.  I sealed the dark grey with a Matte spray (I use Krylon) and then sprayed on some of the worn effects by AK.  After masking the openings in the hull and top area I sprayed the light grey back on after the worn effects dried and allowed that to dry.

I used a dampened Q-Tip again to remove the top coat of paint as though it were worn (Still looks fairly new though)